Skip Navigation Website Accessibility




 

Earthquaker Devices Grand Orbiter V3 Phase Pedal

   
Quantity:    

Add to Cart
This is an EarthQuaker Devices - Grand Orbiter V3 - Phase Machine Pedal!

From EarthQuaker Devices:
"Grand Orbiter is a 4 stage OTA-based phaser with a diverse feature set that can go from stationary and resonant to slow and mellow and on through fast and swirly. It has three way toggle switch to select between the ranges of modulation. The master Rate control fine tunes the speed of the LFO in each of these modes and the flashing red LED acts as a visual indicator, even when the effect is in bypass mode. The Depth control blends the shifted signal in with the dry signal and controls the intensity of the effect. The Sweep control governs the peak frequency of the phased signal’s tone, turned full clockwise the sweep is lively and intense, whereas turning counter clockwise yields a darker, more laid back peak. The Resonance provides a wide range of control over regeneration and at higher settings adds a more pronounced and resonant tone. You can also use the Grand Orbiter as a true pitch vibrato with the “Phase/Vibrato” switch. When in “Vibrato” mode, the dry signal is removed and the Depth controls acts as a volume control. This pedal is 100% analog, true bypass and built entirely by hand in beachy Akron, Ohio."

Tech Specs:
- List Price: $ 199.00
- Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
- Current Draw: 15 mA
- Input Impedance: 1 MΩ
- Output Impedance: - Flexi-Switch® Technology: This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching. For standard latching operation, tap the footswitch once to activate the effect and then tap again to bypass. For momentary operation, hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed. Since the switching is relay based, it requires power to pass signal.
- Power: This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

BUY IT RIGHT THE FIRST TIME!
COME VISIT SKY GUITARS IN DENTON, TX!

We are an authorized EarthQuaker Devices Dealer.
We inspect every single item when it first arrives!

NO INTERNATIONAL SHIPPING AVAILABLE!
PACKED AND READY TO SHIP SAFE AND SOUND!
WE TRY TO DOUBLE BOX EVERY ITEM WE SHIP WHEN POSSIBLE!

ABOUT US
We have been a repair shop for 25 years and repair instruments for people all over the world!

We have been a locally owned guitar shop in Denton, TX since 1994. We provide an incredible selection of musical instruments for both amateur and professional musicians. We stock both acoustic and electric guitars, electric and upright basses, mandolins, resonators, banjos, violins, violas, cellos, drums, pedals, effects, mics, stands, straps, amplifiers, PA gear and more. We are dedicated to competing with and beating the lowest internet prices on everything we carry in-store.

We have long been the place musicians depend on for expert instrument set-up and repair. We started out as an instrument repair business in the early 90's and our business and clientele have grown year after year! We are both Denton, TX's Largest Music Store and Denton's Oldest and Best Musical Instrument Repair Shop.


12/14/21 - BA

CONTACT US

    • Sky Guitars
      (940) 387-2671
    • 521 N. Elm St.
      Denton, TX 76201
    • MON-SAT: 10a - 6p
      Closed Sunday